Dealers / Distributors

Medik Line Stewart
Rruga Sulejman Delvina
(perballe Stadiumit Dinamo)
Tirane, Albania
Phone: +355 4 255 168Fax: +3554248779Contact : Zace Shabanaj
Kropotkina str. 93,A / 220123, Minsk,BelarusPhone: 8 (017) 237-76-81, Mobile: 8 (029) 665-71-72Fax: 8 (017) 237-76-83Contact : Robert G. Yakshouk
Séverine Germondseverine.germond@ultradent.comWallonie / Luxembourg
Wallonië / Luxemburg
Phone: +32 471940611
SD Informatika Doboj
Svetog Save bb, Prizemlje br 9
Doboj, BiH 74000
Phone: +387 53 236 314Fax: +387 53 236 314Toll Free: 0800 50.300Contact : Snježana Starčević
Ultradent Products Inc. - UP Dental
Regionalno predstavništvo za Jugoistočnu Europu
K. Žrtava 63
Zagreb 10090
Phone: +385 1 34 80 331Fax: +385 1 34 80 332Contact : Mario Osvald
15 Arsenalski Blvd.
Sofia 1421
Phone: +3592 950 3020Fax: +3592 950 3021Contact : Ivan Minchev
Hu-Fa Dental
Moravní 909
765 02 Otrokovice
Phone: +420-577 926 226-7Fax: +420-577 926 205Contact : Ing. Pavel Veit
Mesogion 36
Athens T.K. 11527
Phone: +30 210 748 2170Fax: +30 210 748 2109Contact : Simon Maragelis
Dentalia & Fidesdentaliafides@dentaliafides.isLaufasgata 9
600 Akureyri
Phone: 354-588-8999Fax: 354-588-9975Contact : Inga Ingolfsdottir
International Development Centre
Valley Drive, Ilkley
West Yorkshire, England
LS29 8PB
Phone: Sales & Product Information: +44 (0) 1943 605050Fax: +44 (0) 1943 604422
202 Dostyk avenue
Business Center Forum
Almaty 50012
Phone: +77273201073Fax: +7 727 297 96 15Contact : Daniyar Nurmaganbetov
Ultradent Products Inc. - UP Dental
Regionalno predstavništvo za Jugoistočnu Europu
K. Žrtava 63
Zagreb 10090
Phone: +385 1 34 80 331Fax: +385 1 34 80 332Contact : Mario Osvald
Bojmija Str. 2/2
Skopje 1000
Phone: +389 2 24 64 781Fax: +389 2 24 62 739Contact : Jovan Petkovski
Dornwellinfo@dornwell.plul.Zaściankowa 90/1A
Warsaw 02 982
Phone: +48 228 347725Fax: +48 228 347582Contact : Mikolaj Rymaszewski
40, Popa Soare str., first floor, apt.2
Bucarest 2
Phone: +40 21 410 5946Fax: +40 21 321 0061Contact : Dana Dobrescu
S.T.I. Dentmail@stident.ru2, Vodnikov Street Office 180
Russia 125362
Phone: +7 495 229 0644/45/46/47Fax: +7 495 229 0644/45/47Contact : Marina Tabakova, Natalie Evdokimova
Ultradent Products Inc. - UP Dental
Regionalno predstavništvo za Jugoistočnu Europu
K. Žrtava 63
Zagreb 10090
Phone: +385 1 34 80 331Fax: +385 1 34 80 332Contact : Mario Osvald
Dental Medical 8
Subotica 24000
Phone: +381 24 554 927Contact : Dr Djordje Poljakovic
Sirius Dental ulica 32/18
Zemun - Belgrade
Phone: +381 11 2611 752Fax: + 381 11 2611 752Contact : Olga Gostl
Hu-Fa Dental s.r.o.hufa@hufa.skL. Podjavorinskej 1500
022 01 Cadca
Phone: +421 41 433 1016-17Fax: +421 41 433 1015Contact : Miroslava Polaková
Prodent International
Zvezna Ulica 2A
Ljubljana 1000
Phone: +386 1 520 4800Fax: +386 1 520 4822Contact : Vojko Andelic
Åhrén Dental
Nybrogatan 69
114 40 Stockholm
Phone: +46 8 646 11 02Fax: +46 8 88 79 09
Berdychivskaya Street 1
Kiev 4116
Phone: +380 44 455 9957Fax: +380 44 572 2107Contact : Sergey Gorban
International Development Centre
Valley Drive, Ilkley
West Yorkshire LS29 8AL
Phone: +44 1943 60 5050Fax: +44 1943 604422Contact : Tim Butterfield
Casa Schmidt Portugal infoportugal@casa-schmidt.esPhone: 21 4126080Fax: 21 4121215
Dental Express
Phone: 91 500 91 83Fax: 91 500 91 84
Dentina Lda. Portugaldentina@dentina.ptPhone: 21 031 7700Fax: 21 031 7729
Henry Schein Portugal
Phone: 800 834 062Fax: 800 40 834 064
Hispano-Lusa Dental Portugal psilva@hispanolusa.ptPhone: 217 120 927Fax: 217 160 211
Marletta Enterprises Limitedinfo@marlettaenterprises.comMarletta Centre, Triq In-Nawfragju
Naxxar NXR 2470
Phone: +356 27887377Fax: +356 21419959Contact : Michael Marletta
Medik Line "Stewart"
Rruga Sulejman Delvina Pallati 33
Tirane Albania 1001

Medik Line "Stewart" Shpk, Kosovo Office
Road Henri Dunant 0620
Prishtine, Kosovo
Phone: 045389620
Mobile: 044731875
Phone: +355 4 22 55 168Fax: +355 4 22 08 017Contact : Zace Shabanaj
DAB Dental AB info@dabdental.seFinvids väg 8
194 47 Upplands Väsby
Phone: +46 8 506 505 00
Østensjøveien 27
0661, Oslo, Norway /
Postboks 6082 Etterstad
0601, Oslo, Norway
Phone: +47 22 07 27 27Fax: +47 22 07 27 97
Dansk Nordenta A/S
Nydamsvej 8
8362 Hørning
Phone: +45 87 68 16 11Contact : Product Manager, Dentist Gitte Gadegaard
Box 90193, 120 22, Stockholm /

Grosshandlarvägen 1, 120 44 Årsta
Phone: +46 8 546 979 00
Jacobsen Dental
Alfaset 1, Industrivei 4, Oslo, Norway /
Box 97 Alnabru
N-0614, Oslo, Norway
Phone: + 47 22 79 20 20Contact : Sissel Bjella
Norsk Orthoform Depot A/
Tvetenveien 158, 0671 Oslo, Norway /

PO Box95, 0617 Oslo, Norway
Phone: +47 2276 0140Fax: +47 2226 0230
Asentajankatu 6,
00880 Helsinki
Phone: +358 20 7795 200
Jydekrogen 16,
DK-2625 Vallensbæk
Phone: +45 43 66 44 44
LIC Scadenta
Skytterdalen 6, Box 443,
1302 Sandvika,
Phone: +47 67 80 58 80Fax: +47 67 54 57 10
Verkmästaregatan 1,
745 85 Enköping
Phone: + 46 171 230 00
Hammasväline Oy
P.O.Box 15, FI-02101 Espoo,
Orionintie 5, FI-02200 Espoo
Phone: +358 10 588 6000Fax: +358 10 588 6999
Henry Schein UK
Medcare North
Centurion Close
Gillingham Business park,
Phone: 0800 023 2558
Henry Schein
Veluwezoom 16
Almere 1327 AG
Phone: +31 36-53 58 601Fax: +31 36-53 58 609
Ultradent Products Inc. - UP Dental
Regionalno predstavništvo za Jugoistočnu Europu
K. Žrtava 63
Zagreb 10090
Phone: +385 1 34 80 331Fax: +385 1 34 80 332Contact : Mario Osvald
Østensjøveien 27
0661, Oslo, Norway /
Postboks 6082 Etterstad
0601, Oslo, Norway
Phone: +47 22 07 27 27Fax: +47 22 07 27 97

Request Information

* Indicates required field
Information collected on this form will be used by Ultradent to contact you regarding your request.


Direct Composite Template System
  • ​Allows for predictable, high-quality, natural-looking composite restorations
  • Prevents the oxygen inhibition layer during curing process resulting in a hard, glossy surface
  • Allows light to pass through the template to the composite for effective curing
  • Works with any preferred composite
read more »
  • Kit Types

    ​​Select the Uveneer kit type that best meets your needs. You can purchase kits through your dental dealer or distributor.

    • Where to Buy »
      Request Info »
      Uveneer Kit

      Uveneer Kit

      • Item # UVKV3
      16 - Medium upper and lower arch templates; 2 central incisors, 2 lateral incisors, 2 canines, and 2 premolar templates for both the upper and lower arches.
      16 - Large upper and lower arch templates; 2 central incisors, 2 lateral incisors, 2 canines, and 2 premolar templates for both the upper and lower arches.
  • Product Details

    Uveneer is a unique, minimally invasive template system that creates beautiful direct composite veneers with predictable shape and symmetry — all in one visit. Each template mimics natural dentition and is designed to create high-quality natural-looking anterior restorations. Uveneer uses innovative technologies that help achieve a refined, anatomically correct, high-gloss restoration in a fraction of the time than if done freehand. Results are both reproducible and predictable.

    • Allows for predictable, high-quality, natural-looking composite restorations
    • Prevents the oxygen inhibition layer during curing process resulting in a hard, glossy surface
    • Allows light to pass through the template to the composite for effective curing
    • Works with any preferred composite
    • Releases easily from cured composite resin
    • Requires minimal adjusting or polishing—saving time
    • Can be used on individual or multiple teeth
    • Templates are autoclavable and reusable, making it cost effective for both patients and dentists
    • Can enhance practice efficiency
    • Each template is numbered to correspond with the tooth number, tooth size, and upper and lower arch
    • Exclusive only to Ultradent
  • Instructions

    ​Follow these step-by-step instructions to achieve optimal results with Uveneer.  

  • Procedures

    Uveneer Direct Composite Template System Step by Step

    1. 1

      Choose Amelogen® Plus esthetic restorative material or preferred composite shade(s). Select the template that corresponds with the tooth being restored. See handle of template for corresponding tooth number, size, and arch.
    2. 2

      Remove all caries if needed and minimally prepare the tooth.​

    3. 3

      Place interproximal separating matrices and apply Ultra-Etch® etchant, Peak® SE Primer, or preferred etch.​

    4. 4

      ​Rinse etch according to manufacturer’s instructions. Do not rinse if using Peak SE Primer.

    5. 5

      ​Apply Peak® Universal Bond adhesive or preferred adhesive to tooth surface.

    6. 6

      ​Light cure with VALO® curing light 1 x 10 seconds on Standard Power. If using other curing light, cure according to manufacturer instructions.

    7. 7

      ​Apply Amelogen® Plus composite restorative material or preferred composite directly onto tooth.

    8. 8

      ​Do not light cure composite.

    9. 9

      ​Select chosen Uveneer template. Template should ideally cover the entire facial surface of the tooth. If not, additional composite may be used at the periphery to compensate.

    10. 10

      ​Align centerline of template parallel to the midline of the face and perpendicular to the incisal plane. Using thumb, press the concave side of the selected template onto the tooth. Press firmly to remove any trapped air.

    11. 11

      ​Remove any excess composite from the periphery.

    12. 12

      ​Using VALO curing light, cure composite through template. For every 2mm layer, cure 12 x 10 seconds on Standard Power, 12 x 4 seconds on High Power, or 12 x 3 seconds on Xtra Power. If using other curing light, cure according to manufacturer instructions.

    13. 13

      ​Remove the Uveneer template by gently lifting the handle. Using VALO curing light do final cure directly onto composite. To ensure composite is cured thoroughly, for every 2mm layer, cure 3 x 10 seconds on Standard Power, 3 x 4 seconds on High Power, or 3 x 3 seconds on Xtra Power. If using other curing light, cure according to manufacturer instructions.
    14. 14

      ​Avoiding the glossy facial surface, trim excess composite from periphery with a fine flameshaped bur in Ultradent® Composite Finishing Bur Kit. Use Jiffy® Composite Polishers, Brushes, Diamond Strips, or Proximal Saws for minimal finishing and adjusting if desired.

    15. 15

      ​Immediately after use, thoroughly wipe template with alcohol pad, dry, bag, and autoclave according to Uveneer template IFU. Do not leave any composite residue on the template in order to maintain translucency and shine.
    16. 16


    Missing Lateral Incisor and Peg Lateral


    ​A young girl with congenitally missing lateral incisor and a peg lateral. Using Ribbond single-visit bridge and Uveneer templates provide aesthetics, durability, and immediate convenience.

    Images courtesy of Dr. Bob Lowe

    Upper Arch Restoration for Eight Teeth


    ​Smile enhancement using composite veneers with Uveneer templates for 8 teeth in the aesthetic zone.

    Images courtesy of Dr. Ian Shuman

    Upper Arch Restoration


    ​An amazing smile transformation for this young man using composite layering technique and Uveneer template.

    Images courtesy of Dr. Victor Acosta

    Non-Vital Central Incisor


    ​Composite veneer on a dark non-vital central incisor using opaquer, tints and the Uveneer template.

    Images courtesy of Dr. Ahmed Husam Abu Diab

    Esthetic Alternative to Partial Dentures


    ​This patient who was embarrassed of his teeth and disliked using a removable partial denture, or flipper, had this to say about the restorative work done using Uveneer: "I'm very pleased with the results and can't tell you how much I do not miss wearing a flipper. I'm smiling much wider these days and thankful that a procedure like this can give me (or anyone in this position) some time to figure out the ideal and permanent solution [for] a smile."

    Images courtesy of Dr. Sigal Jacobson

    Technical Data

    The Only Direct Composite Template System

    The Uveneer template system is the only template system designed to create beautiful direct composite veneers in one visit. With Uveneer templates, clinicians can create veneers with predictable shape and symmetry every time, for every patient.

    Anatomical Design

    ​Each template is designed to mimic ideal tooth anatomy according to the rules of smile design and the “golden proportion.” Each template incorporates ideal height to width ratio, contour, embrasure, and center midline.

    Due to this precise anatomical contour, the final result will yield different thicknesses of composite (less toward the incisal third and gingival areas and greater in the middle of the facial surface). This varied thickness of material creates different effects and values, and as a result only one shade of composite is needed in many cases to get a natural gradient effect.

    Constructed of Translucent Material

    ​Each translucent template allows light to transfer from the curing light through to the composite. Uveneer templates shut off the composite oxygen inhibited layer during the curing process, thus leaving a finished glossy and contoured surface.

    Will Not Stick to Composite

    Uveneer templates are made from medical grade translucent plastic with a nonstick coating and are both reusable and autoclavable.

    Kit Includes Templates For All Anterior Teeth In The Upper And Lower Arch

    ​​The Uveneer template system kit features 32 templates in total, including both large and medium sizes. Each arch consists of eight templates from centrals to premolars (bicuspids). Each Uveneer template is numbered to correspond with tooth number, tooth size, and upper and lower arch to assist in correct replacement.


    • ​"Uveneer makes the practice of the anterior esthetic dentistry easier, faster and better."

      Dr. George Freedman, DDS
    • ​"Terrific tool to quickly and easily create beautiful anterior restorations."

      Dr. Gary M. Radz, DDS
    • ​"In a single day, I was able to do 11 mock up veneers that were not part of the original schedule, resulting in several new cases being accepted. I wouldn’t want to work without Uveneer now."

      Dr. Chad Wagener, DDS
    • ​“The simplicity of Uveneer is absolutely remarkable. Why didn’t I think of this?”

      Dr. John C. Comisi, DDS, MAGD

    Frequently Asked Questions

    • How does Uveneer work?

      ​The translucent template is pressed over composite that has been laid on the tooth after etching and bonding. The template is removed after the material has cured, thus creating a perfect, contoured, shiny surface. Uveneer is easy to handle, has a nonstick surface, and is autoclavable and reusable.

    • What curing light works best with Uveneer?

      ​Any curing light can be used with Uveneer. VALO® is the optimal choice because of its quality and durability.

    • What type of composite should I use?

      ​​We recommend using Amelogen® Plus, composite restorative material  but Uveneer is compatible with any desired composite and any layering technique.

    • Can Uveneer increase practice profitability?

      ​Yes! Dentists who use Uveneer report that they are performing many more composite veneer procedures than before because they find the process so quick and easy—and affordable for their patients, which has led to higher case acceptance.

    • Is Uveneer reusable? Autoclavable?

      ​Yes, the templates should be autoclaved after each use and can then be reused.

    • What are the main advantages of using Uveneer?

      ​You can use any preferred composite material, and the results are consistent and predictable with regard to final tooth shape, shine, and smile design that otherwise would be difficult or impossible to accomplish. It is very easy to use, saves valuable time because there is no need to spend time carving or polishing, and you only need minimal tooth preparation. It is also cost-effective for both patients and dentists.

    • When should I use Uveneer?

      Uveneer templates can be used for any application where the facial side of the tooth needs to be rebuilt.

      Applications include:

      1. Direct composite veneers
      2. Mock-ups
      3. Temporaries while porcelain veneers are being made in the lab
      4. Broken teeth and Class V, IV restorations
      5. As a stent for gum contouring
    • What prompted this innovation?

      ​While composite materials continued to develop and improve, the method of direct composite veneer application remained unchanged. Dr. Sigal Jacobson was frustrated that she couldn’t achieve predictable results each time and that the process was so time consuming. She decided to do something about it.

    • Will the shine from Uveneer last?

      ​The shine from Uveneer lasts and looks like a natural tooth, because the template is used as an oxygen barrier to prevent the air-inhibited layer.

    • Is Uveneer cost effective?

      ​Uveneer is cost effective because the templates are reusable—by preparing just a couple composite veneers, the kit will have paid for itself.

    • How long do the Uveneer templates last?

      ​Uveneer templates are designed to last if proper care and instructions are followed according to the Uveneer template IFU. Replacement templates are available should one become lost or broken.
    • Is there a learning curve when first using Uveneer templates?

      ​​Uveneer templates are easy to use. But, like all new tools, it can take a little practice to become proficient. One of the good things about the Uveneer template system is that if you aren’t 100% satisfied with your initial result, you can simply cut back a small layer of composite with a bur, then press the Uveneer template with more composite onto the tooth again. You will quickly learn, after one or two trials, how much pressure to use and how much composite to apply to the template. For beginners, we suggest doing a mock-up on the patient—creating a composite veneer without etching or bonding–to evaluate color and shape without committing to the result. We also recommend when first starting out to only work on single-tooth rather than multiple-tooth cases. After gaining some experience and confidence you can then skillfully manage bigger cases.

    • I completed two restorations—one with a Uveneer template and one free-hand. Both were prepped the same. How come the Uveneer template tooth was whiter than the free-hand tooth?

      ​​Difference in color between adjacent teeth can be a result of a few different things. Sometimes, a difference in thickness of composite between the two teeth can change the final color of the restoration. The thicker the layer of composite, the higher the shade value of the final result. It could be that more composite was used with the free-hand restoration than with the Uveneer template. Because of the concave shape of the template, the composite material will spread more which will create more natural value. In order to ensure the same final shade and value, use same thickness of composite and the same technique on both teeth.

      There may have also been a difference in the original color between the two teeth. To avoid differences in the final shade, always complete a direct mock-up on the tooth with a Uveneer template so you can better determine the final outcome before etching and bonding.

    • If a patient has a wider or longer tooth than the template, can I still use the Uveneer template system?

      ​​When we created the Uveneer templates, we looked at various studies about smile design, rules, and proportions, so most patients will fit into the templates in your kit. However, some patients grind their teeth or will have gum recession. In these cases, you can adjust the veneer to the desired length with a bur or disc. If the patient has gum recession, you can also add some composite next to the gums as if you were doing a Class V restoration.

      If the patient has large or wider teeth, you can complete the restoration by pressing the template and blending the excess composite to periphery. Some small finishing adjustments may be required.

    • When should I use a flowable composite?

      ​​A flowable composite should only be used as a last layer when a high-viscosity composite is not shiny enough. We recommend using Vit-l-escence restorative material because it showcases the needed shine without needing to add any flowable composite. However, if you want to add a flowable as a final glaze, we recommend only heavy-filled flowables as they will not stain as much as regular flowables.

    • What should I do if the veneer changes color after the restoration was completed?

      ​If a patient does return with stained veneers, use a bur to remove the top layer of stained composite. Etch, rinse, bond, cure, and add a new layer of composite with the correct Uveneer template and cure.

      Smoking, red wine, coffee, tea, and certain foods can stain composites. In addition, flowable composites have a low amount of filler and can stain or change color, particularly if a layer of flowable composite is used as the top surface layer. If a flowable is used with the Uveneer template system as the top surface layer, it should be a flowable with a heavy fill and more filler particles.

      Also keep in mind that composite can be under-cured, but not over-cured. We recommend using a strong curing light like the VALO® curing light to ensure a complete cure.

    Indications for Use

    ​Use Uveneer template system for direct composite veneer applications, cosmetic mock-ups and shade selection, temporaries during porcelain veneer creation, and all Class 3, 4, and 5 cases.

back to top