Request Information

* Indicates Required Field
Office Info
Contact Info
Information collected on this form will be used by Ultradent to contact you regarding your request.

ExperTemp®

Temporary Crown & Bridge Material

Return Policy All goods returned (unless faulty) in their original sealed packaging and are in a re-saleable condition within 15 days for Gunz and 30 days for Henry Schein will be eligible for refund. Goods purchased from Dentavision shall be returned for credit within 21 days. See full details

Product Details

ExperTemp is a bis-acryl composite provisional material used to fabricate temporary crowns, bridges, inlays, and onlays as well as long-term temporaries. The 10:1 self-cured chemistry is easy to work with and provides exceptional strength, flexibility, and abrasion resistance. Superior performance combined with a natural esthetic make ExperTemp the material of choice for temporization.

  • Easy to trim and polishes beautifully
  • Low oxygen inhibition at polymerization
  • High abrasion resistance and flexibility
  • Available in multiple shades: A1, A2, A3, A3.5, B1, and Bleach White
  • Can be repaired with a packable composite, a flowable composite, or additional ExperTemp material
  • Fluorescence similar to enamel

Indications for Use

ExperTemp

​ExperTemp temporary crown and bridge material is used for the fabrication of temporary prostheses, such as crowns, partial crowns, bridges, inlays, onlays and veneers. It is also used for the customization of prefabricated acrylic and metal crowns and for fabrication of long-term temporary restorations until a permanent restoration is fabricated.

Technical Details

Flexural Modulus

*Trademark of a company other than Ultradent.

​Comparison to competitors.1

Edge Chip

*Trademark of a company other than Ultradent.

​Comparison to competitors.1

Bis-acryl Composite Provisional Material

​ExperTemp is perfect for fabricating temporary crowns, bridges, inlays, onlays, as well as long-term temporaries.

The Two-Component System

​The multi-functional acryl composite is produced using no Bisphenol-A or Bisphenol-A precursors in the manufacturing process. It has similar properties to a filling material and is available in the following shades: A1, A2, A3, A3.5, B1, and Bleach White. ExperTemp restorations can also be adjusted and customized using light-curing composite.

Sold Directly to Licensed Dental Professionals Only

​Ultradent is committed to supporting the dental community. ExperTemp is only sold directly to licensed dental professionals.

Unmatched Quality

​The name Ultradent is synonymous with quality. All of our research and development is done in-house. So is our manufacturing and quality control. This allows us to guide and oversee the entire process—from the time an Ultradent innovation is conceived to the time it’s created and packaged for shipping. We have met the strictest standards, and our facility is ISO 9001 certified. This ensures every product performs exactly as it’s supposed to for you and for your patients.

FAQs

  • Does ExperTemp need to be polished?

    ​Once the oxygen inhibition layer is wiped away, ExperTemp will already have a natural luster and clinicians may choose not to polish. For additional esthetics, we found that the polishing the provisional with the yellow Jiffy® polisher, then the white Jiffy polisher, followed by the Jiffy Goat Hair brush or a polishing wheel will provide an exceptional, life-like polish (no diamond polish needed.) For highly esthetic temporaries, clinicians may choose to place PermaSeal on the surface for a glazing effect.

  • How does ExperTemp withstand staining?

    Staining typically occurs over an extended period of time, so there’s not a high risk of staining that could happen within 1–4 weeks. However, due to its high polishability and composite-like finish, ExperTemp temporary restorations will have excellent stain resistance while in place.

  • If a temporary made with ExperTemp was to chip or break, how can it be repaired?

    ​Provisionals can be repaired with a packable composite, a flowable composite, or additional ExperTemp material.

  • How should ExperTemp be stored?

    ​ExperTemp should be stored at room temperature. (18°C to 29°C / 65°F to 85°F). Once a cartridge of ExperTemp has been started, the product will remain stable until the indicated expiration date. When storing between uses, leave the mixing tip in place after dispensing. The material will harden in the tip, essentially becoming the new cap.

  • Does ExperTemp contain Bisphenol A (BPA)?

    ​No, this material does not contain BPA, which is stated in the product instructions.

  • How many crowns can be made with one cartridge of ExperTemp?

    ​The answer to this will vary based on several factors, but one cartridge will yield approximately 40–50 crowns.

  1. Data on file.