Request Information

* Indicates Required Field
Office Info
Contact Info
Information collected on this form will be used by Ultradent to contact you regarding your request.

Peak Universal Bond

Light-Cured Adhesive with Chlorhexidine (0.2%)

Return Policy All goods returned (unless faulty) in their original sealed packaging and are in a re-saleable condition within 15 days for Gunz and 30 days for Henry Schein will be eligible for refund. Goods purchased from Dentavision shall be returned for credit within 21 days. See full details

Product Details

Peak Universal Bond’s versatile formulation is ideal for indirect and direct bonding, including post and core procedures. With 7.5% filler, its viscosity has been optimized for minimal film thickness (2μm) and superior strength. The addition of chlorhexidine in Peak Universal Bond may provide the added benefit of improving long-term bond strengths.
  • Universal adhesive can be used in all bonding procedures, direct and indirect
  • Proven superior bond strengths1–4
  • Added chlorhexidine can ensure long-lasting bonds5–8
  • Available in syringe or bottle delivery



2018 Reality Four Star Award2017 Reality Four Star Award2016 Reality Four Star Award2015 Reality Four Star Award

Indications for Use

Peak Universal Bond

​Use Peak Universal Bond for all etching and bonding needs in restorative dentistry.


Peak Universal Bond

Simple Delivery to Superior Bonding

Peak Universal Bond is delivered to the preparation site with the convenient applicator brush.

Technical Details

Highest Bond Strengths to Both Dentin and Enamel

A university study1 conducted at Dalhousie University in Halifax, Nova Scotia, Canada, compared the shear bonding strengths of five bonding systems. The results showed that the Peak Universal Adhesive System yielded the highest bond strengths to both dentin and enamel. An additional internal study9 conducted by Ultradent’s R&D team tested 15 materials for shear bond strength. Seven specimens of dentin or cut enamel were made for each set. All sets were prepared according to manufacturer’s instructions and bond strength testing was conducted according to Ultradent’s testing methods, which were since adopted by the ISO as a standard for testing. The strengths were recorded and averaged. The Peak Universal Adhesive System recorded the highest bond strengths on both dentin and enamel.

Ideal for All Bonding Procedures

The Peak Universal Adhesive System features a universal bonding agent that is compatible with both self-etch and total-etch techniques. Its universal formulation works with all bonding substrates—including dentin, enamel, porcelain, metal, composite, and zirconia—and it provides superior bond strengths, making it the ideal choice for all bonding procedures.

Less Sensitivity

Because bonding success begins with a quality etch, both Peak® SE Primer and Ultra-Etch® are formulated to create an optimally prepared surface for bonding-resin penetration. When Peak Universal Bond is applied to the prepared surface, the result is unsurpassed bond strength and complete resin impregnation without voids, which reduces the possibility of residual patient sensitivity.

Saves Time and Money

Because Peak can be used for all direct and indirect bonding procedures, including post and core procedures, it saves you time and money by eliminating the need for material-sensitive products and reducing inventory in your office.

Contains Chlorhexidine for Enhanced Bond Strengths

Peak’s unique formulation contains a 0.2% concentration of chlorhexidine, which may ensure long-term bond strengths.5–8

Two Delivery Options

Peak Universal Bond is available in two delivery options: syringes for intraoral control, minimal waste, and preservation of critical, oxygen-sensitive ingredients, and bottles for easy dispensing and convenient delivery with an applicator brush.


Peak Universal Bond Step by Step

  1. 1


    A. Total-Etch: Etch for 20 seconds with Ultra-Etch, then suction, rinse for 5 seconds, and dry

    B. Self-Etch: Scrub Peak SE Primer into preparation for 20 seconds and air thin

  2. 2


    Place 1–2 drops of Peak Universal Bond into well

  3. 3


    Dip applicator brush into well

  4. 4


    Use applicator brush to apply Peak Universal Bond, scrubbing for 10 seconds

  5. 5


    Air dry with half pressure for 10 seconds

  6. 6


    Light cure with VALO® for 10 seconds in standard mode

  7. 7

    ​NOTE: If using syringe, affix Inspiral® Brush tip. Test expression before applying. Follow steps 4–6.


  • I’ve been a PQ1 user for a long time. Why would I want to switch to Peak Universal Bond?

    Peak Universal Bond is the result of years of research and development, and there are a lot of advantages Peak Universal Bond offers. For example, Peak Universal Bond is only 7.5% filled where PQ1™ is 40% filled, yet Peak Universal Bond offers higher bond strengths than PQ1 (71.3 MPa vs. 62.8 MPa, respectively). Also, Peak Universal Bond works with both self-etch and total-etch techniques while PQ1 only works with the total-etch technique. Finally, Peak Universal Bond includes chlorhexidine (0.2%), which may ensure long-term bond strengths.5–8 PQ1 does not.
  • What substrates does Peak Universal Bond adhere to?

    Like its name implies, Peak Universal Bond is truly a universal bonding agent. It provides excellent bond strengths on dentin, enamel, composite, metal, porcelain, and zirconia.
  • Can I use a chlorhexidine product like Consepsis® in conjunction with Peak Universal Bond?

    Yes, but the appropriate time to use it will depend on the technique you use. If you’re using a self-etch technique, apply the chlorhexidine before etching. If you’re using a total-etch technique, apply chlorhexidine after the etchant has been rinsed and before Peak Universal Bond is placed.
  1. Price RB, McLeod M, Felix CM. Bond strengths of self-etching bonding systems to dentin and enamel. J Dent Res. 87(Spec Iss A):0825, 2008 (
  2. Clinicians Report, Volume 3, Issue 6, June 2010.
  3. Burgess J, Cakir D. Shear bond strength comparison of six adhesives to dentin with and without the application of chlorhexidine. 2010. Data available upon request.
  4. In-house testing shows the superior bond strengths of Peak Universal Bond. Data available upon request.
  5. Carrilho MRO, Carvalho RM, de Goes MF, et al. Chlorhexidine preserves dentin bond in vitro. J Dent Res. 2007;86(1):90–94.
  6. Carrilho MRO, Geraldeli S, Tay F, et al. In vivo preservation of the hybrid layer by chlorhexidine. J Dent Res. 2007;86(6):529–533.
  7. Brackett WW, Tay FR, Brackett MG, Dib A, Sword RJ, Pashley DH. The effect of chlorhexidine on dentin hybrid layers in vivo. Oper Dent. 2007;32(2):107–111.
  8. Vargas M. Ultramorphological evaluation of the resin-dentin-enamel interface produced by three proprietary self-etching adhesive systems. 2007. Data on file.
  9. Data on file.